Magnetic PVC Tile / Magnetic Vinyl Tile Commercial Floor

• After-sales Service: Online Technical Support, Onsite Installation
• Warranty: 1year
• Material: PVC
• Style: Modern
• Function: Anti-Slip, Moisture Proof, Wear-Resistant, Fireproof, Waterproof, Soundproof
• Thickness: 2mm, 2.5mm, 3mm
• Model NO.: 2mm, 2.5mm, 3mm
• Lead Hardness: Soft
• Surface Treatment: UV
• Pattern: Wood,Stone,Carpet
• Color: Multi-Color
• State: New
• Usage: Household, Commercial, Sports
• Transport Package: Pallet
• Specification: 600X600MM/610X610MM
• Trademark: SANJING
• Origin: China
• HS Code: 39181090
• Production Capacity: 500000m2/Year

Product Description

Magnetic PVC floor tile combines elegance with modern carpet, wood, and stone patterns, suitable for any space, DIY installation. Durable and waterproof, this series is a combination of the advantages of high end resilient flooring that is simple and does not require glue to install. Stunning appearance offers plenty of options for your charming office. Magnetic PVC tile can be installed on the steel bare panels, the preparation of the lower floor is greatly reduced. It is 1st choice for the office building which installed with the steel raised access floor.
Size:600x600mm / Thickness: 1.5mm, 2mm, 2.5mm, 3mm


Features:

1. Water-proof & slide-resisting
2. Environmental protection, non-poisonous, harmless and without radioactive elements
3. Light, the best flooring decorative material for multistory building
4. Wear-resisting
5. Tough & tensile, comfortable in foot touch
6. Shock-resisting
7. Damp-proof, non-deformed with water
8. Acid-resisting & alkali-resisting
9. Insulated
10. Fire-proof
11. Easy to install, compact without sand and cement
12. Durable, easy to clean and maintain.

Install:
1. If necessary, pry up wood moldings around the perimeter of the floor so that tile can be placed underneath during installation.
2. To eliminate small cuts around the edges and to leave a uniform border, find the center of the room before you begin. To do this, treat the room as a rectangle (disregarding offsets, alcoves, etc.). Snap a chalk line from the center points of the end walls. At the center of this line, use a carpenter's square or tile to draw a second chalk line perpendicular to the first and extend this line to the walls. The center of the room is where these two chalk lines intersect.
3. Start placing tile at the center point, following the chalk lines. Do not slide tiles into place. Peel off the protective paper, carefully set each tile in place, and press down firmly. For best appearance, install tiles with the arrows on the back all pointing in the same direction.
Note: To prevent damage, do not attempt to slide or move tiles once in place.
4. Install tiles over one quarter go the floor at a time. Don't install cut (border) tile around the edges of the room until the main area has been covered.
5. To fit border tiles, first place a loose tile directly over the last whole tile closest to the wall. Then put another tile against the wall overlapping the tile to be cut, make a mark, then cut the tile. Check to see if the fit is acceptable before setting the tile in place.
Caution: You may walk on your vinyl tile floor immediately after installing. Do not wash the floor for 48 to 72 hours after installation.

Maintenance:
1. Remove dirt by sweeping, damp mopping, or vacuuming regularly.
2. Do not clean with heavy, abrasive cleaning products
3. Use furniture leg protectors
4. Clean occasionally with an appropriate vinyl tile cleaner.
Caution: Do not wax, it will make the surface very slippery, which may lead to accidents.