Multilayer PVC Tile Vinyl Tile Commercial Floor

• After-sales Service: Online Technical Support, Onsite Installation
• Warranty: 1year
• Material: PVC
• Style: Modern
• Function: Anti-Slip, Moisture Proof, Wear-Resistant, Fireproof, Waterproof, Soundproof
• Thickness: 2mm, 3mm 4mm, 5mm
• Model NO.: multilayer
• Lead Hardness: Soft
• Surface Treatment: UV
• Pattern: Wood,Stone,Carpet
• Color: Multi-Color
• State: New
• Usage: Household, Commercial, Sports
• Transport Package: Pallet
• Specification: 600X600MM/610X610MM
• Trademark: SANJING
• Origin: China
• HS Code: 39181090
• Production Capacity: 500000m2/Year

Product Description

Sanjing multilayer PVC floor have several major product lines include a wide variety of imitated wood, stone and carpet, suitable for professional occasions such as medical school offices and retail places.
The best floor materials must be durable, high quality, easy to clean and maintain, sound-absorbing, non-skid and so on. Each of the commercial plastic floorboards introduced by Sanjing has special properties that are suitable for specific locations. Customers can always choose the one that suits their needs from a wide variety of products.

Non-slip safety: non-slip plastic floor series
Noise reduction: sound-absorbing plastic floor
Universal plastic floor, suitable for a variety of occasions
More can customize the pattern of digital printing floor

Application :
The product is perfect for raised access floor and existing hard floors, popularly used in office rooms, retail interiors, general commercial surroundings.

 

Features:

1. Water-proof & slide-resisting
2. Environmental protection, non-poisonous, harmless and without radioactive elements
3. Light, the best flooring decorative material for multistory building
4. Wear-resisting
5. Tough & tensile, comfortable in foot touch
6. Shock-resisting
7. Damp-proof, non-deformed with water
8. Acid-resisting & alkali-resisting
9. Insulated
10. Fire-proof
11. Easy to install, compact without sand and cement
12. Durable, easy to clean and maintain.

Install:
1. If necessary, pry up wood moldings around the perimeter of the floor so that tile can be placed underneath during installation.
2. To eliminate small cuts around the edges and to leave a uniform border, find the center of the room before you begin. To do this, treat the room as a rectangle (disregarding offsets, alcoves, etc.). Snap a chalk line from the center points of the end walls. At the center of this line, use a carpenter's square or tile to draw a second chalk line perpendicular to the first and extend this line to the walls. The center of the room is where these two chalk lines intersect.
3. Start placing tile at the center point, following the chalk lines. Do not slide tiles into place. Peel off the protective paper, carefully set each tile in place, and press down firmly. For best appearance, install tiles with the arrows on the back all pointing in the same direction.
Note: To prevent damage, do not attempt to slide or move tiles once in place.
4. Install tiles over one quarter go the floor at a time. Don't install cut (border) tile around the edges of the room until the main area has been covered.
5. To fit border tiles, first place a loose tile directly over the last whole tile closest to the wall. Then put another tile against the wall overlapping the tile to be cut, make a mark, then cut the tile. Check to see if the fit is acceptable before setting the tile in place.
Caution: You may walk on your vinyl tile floor immediately after installing. Do not wash the floor for 48 to 72 hours after installation.

Maintenance:
Vinyl tile floors require minimum care, here are a few tips:
1. Remove dirt by sweeping, damp mopping, or vacuuming regularly.
2. Do not clean with heavy, abrasive cleaning products
3. Use furniture leg protectors
4. Clean occasionally with an appropriate vinyl tile cleaner.
Caution: Do not wax, it will make the surface very slippery, which may lead to accidents.